Elmo Pro v.1.403.16 User Manual Download Page 132

Page: 132 / 156

Click

Yes

to save the completed percentage of the backup session. When

Yes

is clicked, the video backup that has

been created before termination will be saved as a separate file.

When

is clicked, no backup files will be created

1.5.3.3. Creating New Video Backup Session

New backup sessions can be created directly from the Backup window.

To create a brand new backup session, do the following:

1. Set the video backup start date and time from the

Start Date/Time

2. Set the video backup end date and time from the

End Date/Time

Tip

Make sure there is recorded video data in
the selected time period

3. Click the

Channels -> Channels

tab and select video channels to back up. To select a video channel, double-

click on the corresponding checkbox. Only channels activated in the Hardware Setup tab will be displayed. Click

Select All

to select all available video channels.

Note

Only the video data from selected video
channels will be backed up

4. Click the

Channels -> Video Settings

tab to choose the backup video format from ELMO Compression

(default) and AVI.

Creating AVI Backup session:

a. Select

AVI

radio button

b. Select AVI video codec from the list.

Attention:

It is highly advisable to leave the default codec chosen by the Server - it is always the latest

available codec. (In this example, Microsoft MPEG-4 Video Codec V2). The only reason to change the codec to an
earlier version would be to allow the playback of an AVI backup file on older systems with older codecs installed.

c. Click the

AVI Text Embedding

tab

128

ELMO-PRO v.1.403.16 - User Manual

Backup Window

Chapter 1. ELMO-PRO Server

XML to PDF by RenderX XEP XSL-FO Formatter, visit us at

http://www.renderx.com/

Summary of Contents for Pro v.1.403.16





























































































































































Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands

Elmo Pro v.1.403.16, User Manual

Search results

Summary of Contents for Pro v.1.403.16

Reviews:

Related manuals for Pro v.1.403.16

Brands by name

Popular brands