Edge-Core AS5700-54X, Cli Reference Manual, Page: 943 / 1116

Chapter 29
| IP Routing Commands
Border Gateway Protocol (BGPv4)
– 943 –
◆
Use this command to clear peering sessions when changes are made to any
BGP access lists, weights, or route-maps.
◆
Route refresh (RFC 2918) allows a router to reset inbound routing tables
dynamically by exchanging route refresh requests with peers. Route refresh
relies on the dynamic exchange of information with supporting peers. It is
advertised through BGP capability negotiation, and all BGP routers must
support this capability.
Example
This example assumes that soft re-configuration has been set on the neighboring
router.
Console(config-router)#clear ip bgp 192.168.0.254 soft in
Console(config-router)#
clear ip bgp
dampening
This command clears route dampening information and unsuppresses any
currently suppressed routes.
Syntax
clear ip bgp dampening [ ip-address [ netmask ]]
ip-address – IP address of network or peer router.
netmask – Network mask that identifies the network address bits.
Command Mode
Privileged Exec
Default Setting
None
Example
If no keywords are entered as in this example, route dampening information is
cleared for the entire routing table.
Console(config-router)#clear ip bgp dampening
Console(config-router)#