Edge-Core AS5700-54X, Cli Reference Manual, Page: 221 / 1116

Chapter 7
| Authentication Commands
Client
– 221 –
RADIUS Server Group:
Group Name Member Index
------------------------- -------------
radius 1
Console#
Client
Terminal Access Controller Access Control System () is a logon
authentication protocol that uses software running on a central server to control
access to TACACS-aware devices on the network. An authentication server contains
a database of multiple user name/password pairs with associated privilege levels
for each user or group that require management access to a switch.
tacacs-server host
This command specifies the server and other optional parameters. Use
the
no form to remove the server, or to restore the default values.
Syntax
tacacs-server index host host-ip-address [ key key ] [ port port-number ]
[ retransmit retransmit ] [ timeout timeout ]
no tacacs-server index
index - The index for this server. (Range: 1)
host-ip-address - IP address of a server.
key - Encryption key used to authenticate logon access for the client.
Enclose any string containing blank spaces in double quotes. (Maximum
length: 48 characters)
port-number - server TCP port used for authentication messages.
(Range: 1-65535)
retransmit - Number of times the switch will try to authenticate logon
access via the server. (Range: 1-30)
timeout - Number of seconds the switch waits for a reply before resending
a request. (Range: 1-540)
Table 40: Client Commands
Command Function Mode
tacacs-server host Specifies the server and optional parameters GC
tacacs-server key Sets the encryption key GC
tacacs-server port Specifies the server network port GC
tacacs-server retransmit Sets the number of retries GC
tacacs-server timeout Sets the interval between sending authentication requests GC
show tacacs-server Shows the current settings GC