Edge-Core AS5700-54X, Cli Reference Manual, Page: 263 / 1116

Chapter 8
| General Security Measures
Network Access (MAC Address Authentication)
– 263 –
network-access
mac-filter
Use this command to add a MAC address into a filter table. Use the no form of this
command to remove the specified MAC address.
Syntax
[ no ] network-access mac-filter filter-id
mac-address mac-address [ mask mask-address ]
filter-id - Specifies a MAC address filter table. (Range: 1-64)
mac-address - Specifies a MAC address entry. (Format: xx-xx-xx-xx-xx-xx)
mask - Specifies a MAC address bit mask for a range of addresses.
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
◆
Specified addresses are exempt from network access authentication.
◆
This command is different from configuring static addresses with the mac-
address-table static command in that it allows you configure a range of
addresses when using a mask, and then to assign these addresses to one or
more ports with the
network-access port-mac-filter command.
◆
Up to 64 filter tables can be defined.
◆
There is no limitation on the number of entries that can entered in a filter table.
Example
Console(config)#network-access mac-filter 1 mac-address 11-22-33-44-55-66
Console(config)#
mac-authentication
reauth-time
Use this command to set the time period after which an authenticated MAC
address is removed from the secure address table. Use the
no form of this
command to restore the default value.
Syntax
mac-authentication reauth-time seconds
no mac-authentication reauth-time
seconds - The reauthentication time period. (Range: 120-1000000 seconds)
Default Setting
1800