Edge-Core AS5700-54X, Cli Reference Manual, Page: 192 / 1116

Chapter 5
| SNMP Commands
SNMPv3 Commands
– 192 –
auth | noauth | priv - This group uses SNMPv3 with authentication, no
authentication, or with authentication and privacy. See “Simple Network
Management Protocol” in the
Web Management Guide for further
information about these authentication and encryption options.
readview - Defines the view for read access. (1-32 characters)
writeview - Defines the view for write access. (1-32 characters)
notifyview - Defines the view for notifications. (1-32 characters)
Default Setting
Default groups: public
1
(read only), private
2
(read/write)
readview - Every object belonging to the Internet OID space (1).
writeview - Nothing is defined.
notifyview - Nothing is defined.
Command Mode
Global Configuration
Command Usage
◆
A group sets the access policy for the assigned users.
◆
When authentication is selected, the MD5 or SHA algorithm is used as specified
in the
snmp-server user command.
◆
When privacy is selected, the DES 56-bit algorithm is used for data encryption.
◆
For additional information on the notification messages supported by this
switch, see the
Web Management Guide . Also, note that the authentication, link-
up and link-down messages are legacy traps and must therefore be enabled in
conjunction with the
snmp-server enable traps command.
Example
Console(config)#snmp-server group r&d v3 auth write daily
Console(config)#
1. No view is defined.
2. Maps to the defaultview.