Edge-Core AS5700-54X, Cli Reference Manual, Page: 812 / 1116

Chapter 29
| IP Routing Commands
Global Routing Configuration
– 812 –
Example
Console(config)#hash-selection list 2 ipv4
Console(config-ipv4-hash-sel)#dst-ip
Console#
dst-l4-port
(IPv4 Hash)
This command adds the destination Layer 4 protocol port hash attribute to the
hash selection list. Use the
no form to remove the specified attribute.
Syntax
[ no ] dst-l4-port
Command Mode
IPv4 hash selection mode
Example
Console(config)#hash-selection list 2 ipv4
Console(config-ipv4-hash-sel)#dst-l4-port
Console#
protocol-id
(IPv4 Hash)
This command adds the protocol ID hash attribute to the hash selection list. Use
the
no form to remove the specified attribute.
Syntax
[ no ] protocol-id
Command Mode
IPv4 hash selection mode
Example
Console(config)#hash-selection list 2 ipv4
Console(config-ipv4-hash-sel)#protocol-id
Console#
src-ip
(IPv4 Hash)
This command adds the source IPv4 address hash attribute to the hash selection
list. Use the
no form to remove the specified attribute.
Syntax
[ no ] src-ip
Command Mode
IPv4 hash selection mode