manualshive.com logo in svg

Edge-Core AS5700-54X, Cli Reference Manual, Page: 138 / 1116

Share
Download
Edge-Core AS5700-54X Cli Reference Manual Download Page 138

Chapter 4

  |  System Management Commands

File Management

–  138  –

◆

Any changes made to the default setting can be displayed with the 

show 

running-config

 or 

show startup-config

 commands.

Example

Console(config)#upgrade opcode auto

Console(config)#upgrade opcode path tftp://192.168.0.1/sm24/

Console(config)#

If a new image is found at the specified location, the following type of messages 
will be displayed during bootup.

.

.

.

Automatic Upgrade is looking for a new image

New image detected: current version 1.1.1.0; new version 1.1.1.2

Image upgrade in progress

The switch will restart after upgrade succeeds

Downloading new image

Flash programming started

Flash programming completed

The switch will now restart

.

.

.

upgrade opcode path

This command specifies an TFTP server and directory in which the new opcode is 
stored. Use the 

no

 form of this command to clear the current setting.

Syntax 

upgrade opcode path 

opcode-dir-url

no

 

upgrade opcode path 

opcode-dir-url

 - The location of the new code.

Default Setting 

None

Command Mode 

Global Configuration

Command Usage 

◆

This command is used in conjunction with the 

upgrade opcode auto

 command 

to facilitate automatic upgrade of new operational code stored at the location 
indicated by this command. 

◆

The name for the new image stored on the TFTP server must be 
aos5600-54x.bix. However, note that file name is not to be included in this 
command.

Summary of Contents for AS5700-54X





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments