Edge-Core AS5700-54X, Cli Reference Manual, Page: 434 / 1116

Chapter 15
| UniDirectional Link Detection Commands
– 434 –
show udld
This command shows UDLD configuration settings and operational status for the
switch or for a specified interface.
Syntax
show udld [ interface interface ]
interface
ethernet unit / port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-32/54)
Command Mode
Privileged Exec
Example
Console#show udld
Message Interval : 15
Detection Interval : 5 seconds
Recovery : Disabled
Recovery Interval : 300 seconds
Interface UDLD Mode Oper State Msg Invl
Port State Det Invl
--------- -------- ---------- ------------------------------------- --------
Eth 1/ 1 Disabled Normal Disabled 7 s
Unknown 5 s
Eth 1/ 2 Disabled Normal Disabled 7 s
Unknown 5 s
Eth 1/ 3 Disabled Normal Disabled 7 s
Unknown 5 s
Eth 1/ 4 Disabled Normal Disabled 7 s
Unknown 5 s
Eth 1/ 5 Disabled Normal Disabled 7 s
Unknown 5 s
.
.
.
Console#show udld interface ethernet 1/1
Interface UDLD Mode Oper State Msg Invl
Port State Det Invl
--------- -------- ---------- ------------------------------------- --------
Eth 1/ 1 Disabled Normal Disabled 7 s
Unknown 5 s
Console#
Table 85: show udld - display description
Field Description
Message Interval The interval between UDLD probe messages for ports in advertisement phase
Detection Interval The period the switch remains in detection state after discovering a neighbor
Recovery Shows if automatic recovery from UDLD disabled port state is enabled