Edge-Core AS5700-54X, Cli Reference Manual, Page: 264 / 1116

Chapter 8
| General Security Measures
Network Access (MAC Address Authentication)
– 264 –
Command Mode
Global Configuration
Command Usage
◆
The reauthentication time is a global setting and applies to all ports.
◆
When the reauthentication time expires for a secure MAC address it is removed
by the switch from the secure MAC table, and the switch will only perform the
authentication process the next time it receives the MAC address packet.
Example
Console(config)#mac-authentication reauth-time 300
Console(config)#
network-access
dynamic-qos
Use this command to enable the dynamic QoS feature for an authenticated port.
Use the
no form to restore the default.
Syntax
[ no ] network-access dynamic-qos
Default Setting
Disabled
Command Mode
Interface Configuration
Command Usage
◆
The RADIUS server may optionally return dynamic QoS assignments to be
applied to a switch port for an authenticated user. The “Filter-ID” attribute
(attribute 11) can be configured on the RADIUS server to pass the following
QoS information:
Table 52: Dynamic QoS Profiles
Profile Attribute Syntax Example
DiffServ service-policy-in = policy-map-name service-policy-in=p1
Rate Limit rate-limit-input = rate (Kbps) rate-limit-input=100 (Kbps)
rate-limit-output = rate (Kbps) rate-limit-output=200 (Kbps)
802.1p switchport-priority-default = value switchport-priority-default=2
IP ACL ip-access-group-in = ip-acl-name ip-access-group-in=ipv4acl
IPv6 ACL ipv6-access-group-in = ipv6-acl-name ipv6-access-group-in=ipv6acl
MAC ACL mac-access-group-in = mac-acl-name mac-access-group-in=macAcl