Edge-Core AS5700-54X, Cli Reference Manual, Page: 399 / 1116

Chapter 11
| Link Aggregation Commands
Trunk Status Display Commands
– 399 –
Trunk Status Display Commands
show lacp
This command displays LACP information.
Syntax
show lacp [ port-channel ] { counters | internal | neighbors | sys-id }
port-channel - Local identifier for a link aggregation group. (Range: 1-16/27)
counters - Statistics for LACP protocol messages.
internal - Configuration settings and operational state for local side.
neighbors - Configuration settings and operational state for remote side.
sysid - Summary of system priority and MAC address for all channel groups.
Default Setting
Port Channel: all
Command Mode
Privileged Exec
Example
Console#show lacp 1 counters
Port Channel : 1
------------------------------------------------------------
Member Port : Eth 1/1
LACPDU Sent : 63
LACPDU Received : 62
MarkerPDU Sent : 0
MarkerPDU Received : 0
MarkerResponsePDU Sent : 0
MarkerResponsePDU Received : 0
Unknown Packet Received : 0
Illegal Packet Received : 0
LACPDUs Sent : 12
LACPDUs Received : 6
Marker Sent : 0
Marker Received : 0
LACPDUs Unknown Pkts : 0
LACPDUs Illegal Pkts : 0
.
.
.
Table 73: show lacp counters - display description
Field Description
Port Channel Local identifier for a link aggregation group.
Member Port The ports active in this link aggregation group.
LACPDU Sent Number of valid LACPDUs transmitted from this channel group.
LACPDU Received Number of valid LACPDUs received on this channel group.
Marker Sent Number of valid Marker PDUs transmitted from this channel group.