Edge-Core AS5700-54X, Cli Reference Manual, Page: 608 / 1116

Chapter 22
| Multicast Filtering Commands
IGMP Filtering and Throttling
– 608 –
ip igmp profile
This command creates an IGMP filter profile number and enters IGMP profile
configuration mode. Use the
no form to delete a profile number.
Syntax
[ no ] ip igmp profile profile-number
profile-number - An IGMP filter profile number. (Range: 1-4294967295)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
A profile defines the multicast groups that a subscriber is permitted or denied to
join. The same profile can be applied to many interfaces, but only one profile can
be assigned to one interface. Each profile has only one access mode; either permit
or deny.
Example
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#
permit, deny
This command sets the access mode for an IGMP filter profile. Use the no form to
delete a profile number.
Syntax
{ permit | deny }
Default Setting
Deny
Command Mode
IGMP Profile Configuration
Command Usage
◆
Each profile has only one access mode; either permit or deny.
◆
When the access mode is set to permit, IGMP join reports are processed when a
multicast group falls within the controlled range. When the access mode is set
to deny, IGMP join reports are only processed when a multicast group is not in
the controlled range.