Edge-Core AS5700-54X, Cli Reference Manual, Page: 630 / 1116

Chapter 22
| Multicast Filtering Commands
IGMP (Layer 3)
– 630 –
ip igmp
max-resp-interval
This command configures the maximum response time advertised in IGMP queries.
Use the
no form of this command to restore the default.
Syntax
ip igmp max-resp-interval seconds
no ip igmp max-resp-interval
seconds - The report delay advertised in IGMP queries.
(Range: 0-255 tenths of a second)
Default Setting
100 (10 seconds)
Command Mode
Interface Configuration (VLAN)
Command Usage
◆
IGMPv1 does not support a configurable maximum response time for query
messages. It is fixed at 10 seconds for IGMPv1.
◆
By varying the Maximum Response Interval, the burstiness of IGMP messages
passed on the subnet can be tuned; where larger values make the traffic less
bursty, as host responses are spread out over a larger interval.
◆
The number of seconds represented by the maximum response interval must
be less than the Query Interval (
page 631 ).
Example
The following shows how to configure the maximum response time to 20 seconds.
Console(config-if)#ip igmp query-max-response-time 200
Console(config-if)#
Related Commands
ip igmp version (633)
ip igmp query-interval (631)