EMR-5000
IM02602012E
Executing a switching command via the devices HMI is only possible when the
switching authority is set to
»Local«. If no switching authority is given, this has to be
set first to »Local«
or
»Local and Remote«.
With the softkey »OK« it can be switched back to the single line diagram page.
Pushing the softkey »Mode«
leads to the menu
»General Settings«.
In this menu the switching authority can be changed.
Select between »Local«
or
»Local and Remote«.
Now it is possible to execute switching commands at the HMI.
www.eaton.com
463
x
QA1
QB1
QB2
x
QA1
QB1
QB2