![background image](http://html1.mh-extra.com/html/eaton/emr-5000/emr-5000_installation-operation-and-maintenance-manual_39859191029.webp)
EMR-5000
IM02602012E
Name
Description
RO-4Z X2.RO 3
Signal: Relay Output
RO-4Z X2.RO 4
Signal: Relay Output
RO-4Z X2.DISARMED!
Signal: CAUTION! RELAYS DISARMED in order to safely perform maintenance while eliminating the risk of
taking an entire process off-line. (Note: Zone Interlocking and Supervision Contact cannot be disarmed). YOU
MUST ENSURE that the relays are ARMED AGAIN after maintenance
RO-4Z X2.Outs forced
Signal: The State of at least one Relay Output has been set by force. That means that the state of at least one
Relay is forced and hence does not show the state of the assigned signals.
RO-4 X5.RO 1
Signal: Relay Output
RO-4 X5.RO 2
Signal: Relay Output
RO-4 X5.RO 3
Signal: Relay Output
RO-4 X5.RO 4
Signal: Relay Output
RO-4 X5.DISARMED!
Signal: CAUTION! RELAYS DISARMED in order to safely perform maintenance while eliminating the risk of
taking an entire process off-line. (Note: Zone Interlocking and Supervision Contact cannot be disarmed). YOU
MUST ENSURE that the relays are ARMED AGAIN after maintenance
RO-4 X5.Outs forced
Signal: The State of at least one Relay Output has been set by force. That means that the state of at least one
Relay is forced and hence does not show the state of the assigned signals.
AnIn[1].Broken wire
Signal: Broken wire. This signal is only valid, if the analog input is used in the 4..20 mA mode.
AnIn[1].Input forced
The value of analog Input has been set by force. That means that the value of the analog Input is forced and
does not represent the real measured value.
AnIn[2].Broken wire
Signal: Broken wire. This signal is only valid, if the analog input is used in the 4..20 mA mode.
AnIn[2].Input forced
The value of analog Input has been set by force. That means that the value of the analog Input is forced and
does not represent the real measured value.
FldC[1].Active
Signal: Active
FldC[1].ExBlo
Signal: External Blocking
FldC[1].Blo TripCmd
Signal: Trip Command blocked
FldC[1].ExBlo TripCmd
Signal: External Blocking of the Trip Command
FldC[1].Pickup
Signal: Pickup
FldC[1].Trip
Signal: Trip
FldC[1].TripCmd
Signal: Trip Command
FldC[1].ExBlo1-I
Module Input State: External Blocking1
FldC[1].ExBlo2-I
Module Input State: External Blocking2
FldC[1].ExBlo TripCmd-I
Module Input State: External Blocking of the Trip Command
FldC[2].Active
Signal: Active
FldC[2].ExBlo
Signal: External Blocking
FldC[2].Pickup
Signal: Pickup
FldC[2].Alarm
Alarm
FldC[2].ExBlo1-I
Module Input State: External Blocking1
FldC[2].ExBlo2-I
Module Input State: External Blocking2
Pres[1].Active
Signal: Active
Pres[1].ExBlo
Signal: External Blocking
www.eaton.com
1029