EMR-5000
IM02602012E
Name
Description
Logic.LE76.Gate Out
Signal: Output of the logic gate
Logic.LE76.Timer Out
Signal: Timer Output
Logic.LE76.Out
Signal: Latched Output (Q)
Logic.LE76.Out inverted
Signal: Negated Latched Output (Q NOT)
Logic.LE77.Gate Out
Signal: Output of the logic gate
Logic.LE77.Timer Out
Signal: Timer Output
Logic.LE77.Out
Signal: Latched Output (Q)
Logic.LE77.Out inverted
Signal: Negated Latched Output (Q NOT)
Logic.LE78.Gate Out
Signal: Output of the logic gate
Logic.LE78.Timer Out
Signal: Timer Output
Logic.LE78.Out
Signal: Latched Output (Q)
Logic.LE78.Out inverted
Signal: Negated Latched Output (Q NOT)
Logic.LE79.Gate Out
Signal: Output of the logic gate
Logic.LE79.Timer Out
Signal: Timer Output
Logic.LE79.Out
Signal: Latched Output (Q)
Logic.LE79.Out inverted
Signal: Negated Latched Output (Q NOT)
Logic.LE80.Gate Out
Signal: Output of the logic gate
Logic.LE80.Timer Out
Signal: Timer Output
Logic.LE80.Out
Signal: Latched Output (Q)
Logic.LE80.Out inverted
Signal: Negated Latched Output (Q NOT)
Sys.Maint Mode Active
Signal: Arc Flash Reduction Maintenance Active
Sys.Maint Mode Comm
Signal: Arc Flash Reduction Maintenance Comm Mode
Sys.Maint Mode DI
Signal: Arc Flash Reduction Maintenance Digital Input Mode
Sys.Maint Mode Inactive
Signal: Arc Flash Reduction Maintenance Inactive
Sys.MaintMode Manually
Signal: Arc Flash Reduction Maintenance Manual Mode
Sys.Maint Mode-I
Module Input State: Arc Flash Reduction Maintenance Switch
Sys.Min. 1 param changed
Signal: At least one parameter has been changed
Sys.PS 1
Signal: Parameter Set 1
Sys.PS 2
Signal: Parameter Set 2
Sys.PS 3
Signal: Parameter Set 3
Sys.PS 4
Signal: Parameter Set 4
Sys.PS1-I
State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
Sys.PS2-I
State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
Sys.PS3-I
State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
Sys.PS4-I
State of the module input, respectively of the signal, that should activate this Parameter Setting Group.
Sys.PSS manual
Signal: Manual switch over of a Parameter Set
Sys.PSS via Comm
Signal: Parameter Set Switch via Communication
www.eaton.com
879
