manualshive.com logo in svg

E-Mu Ultraproteus, Operation Manual

Share
Download
E-Mu Ultraproteus Operation Manual Download Page 86

66

UltraProteus Operation Manual

HYPERPRESET MENU

The functions of the Free-Run FG are almost identical to the preset FG's except
that the conditional jumps are more limited. The conditional jumps are listed
below.

Never

................................. Never jumps. Always goes on to next segment.

Always End

...................... Always jumps at the end of the current segment.

Note On End

.................... Jumps at the end of the segment if the note is still on.

Note On Imm.

.................. Jumps immediately if the note is still on.

Note Off End

.................... Jumps at the end of the segment if the note is off.

Note Off Imm.

................. Jumps immediately if the note is off.

Footsw. 1-3 End

.............. Jumps at the end of the segment if the selected

Footswitch is pressed.

Footsw. 1-3 Imm.

........... Jumps immediately if the selected Footswitch is

pressed.

Save Hyperpreset

Changes made to a hyperpreset are NOT made permanent until the hyperpreset
is 

Saved

. To save a hyperpreset, move the cursor to the bottom line and select

the location for the new hyperpreset with the data entry control. The Enter LED
will be flashing. Pressing the Enter switch will confirm the operation. Any of
the hyperpreset locations may be selected. Saving to a hyper erases the existing
hyper in that location. Make sure that the destination does not contain informa-
tion you want to keep.

SAVE HYPER to...
000 SynBass/Lead

2

Summary of Contents for Ultraproteus




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands