manualshive.com logo in svg

E-Mu Ultraproteus, Operation Manual

Share
Download
E-Mu Ultraproteus Operation Manual Download Page 173

152

UltraProteus Operation Manual

STEP-BY-STEP

Key tracking is used to keep the timbre of the sound constant as you play up
and down the keyboard. Of course, you can route any Note-On controller to
control Frequency Tracking.

Like the Morph control, the effect of Transform 2 varies from filter to filter and
in many cases it is not used at all.

 

On a simple lowpass filter, Transform 2 might

be used as a Q (or resonance) control. On a flanger, it might control the depth
of the notches. The Z-plane filter descriptions in the Reference Section give
specific information on the function of Transform 2 in each filter.

Just Do It!

OK. Let's start experimenting with the filters. First, we should connect the
modulation wheel to control Morph so that it will be easy to hear the effect of
this important parameter. Start with a clean slate by selecting the default preset
again. Enter the Preset menu and select an instrument rich in harmonics such
as “I049 P2 Strings 1”.

The mod wheel is usually transmitted on MIDI controller 01. UltraProteus
Controller A is set to controller 01 by default. So if you have not changed this
parameter in the Master menu, Controller A is the mod wheel. We want to route
Controller A (the mod wheel) to Morph. Go to the Realtime Modulation Control
screen and set it as shown below.

REALTIME CTRL #1
CtlA  Morph +127

Note: A good way to verify that the mod wheel is connected is to set the
destination (in the screen above) to “Pitch” instead of “Morph”. Move the
wheel to verify that the pitch varies with the wheel. If so, change the destina-
tion back to “Morph”.

Move to the “Primary Filter Type” screen and scroll though the various filters as
you play the keyboard. Move the modulation wheel and verify that the wheel is
controlling the morph parameter. For this experiment, set the filter type to
“F029 Vocal Cube”. This is an interesting filter and since it is a “cube”, it has
three parameters to adjust.

FILTER TYPE pri
F029 Vocal Cube

INFORMATION ON

CONNECTING MIDI

CONTROLLERS CAN BE FOUND

AT THE END OF THE

PROGRAMMING BASICS

SECTION.

MANY OF THE Z-PLANE

FILTERS DO NOT USE

TRANSFORM 2.

NOTE: FILTER FREQUENCY

TRACKING IS TRANSFORM 1.

Summary of Contents for Ultraproteus




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands