217
Chapter 11: Reference Section
Z-PLANE FILTER DESCRIPTIONS
F209
InFifths.4
The filter thins and mellows out almost any sound. Morphing has the effect
of adding low end warmth. Nice with cellos, hip with trombones. All filters
are scaled for Keyboard Center C1.
Morph:
Starts with the fundamental, and the 5th and their multiples
from 65Hz through 16.64kHz attenuated by 18dB. Results in the
fundamental, 5th and their multiples from 65Hz through 16.64kHz
boosted by 18dB.
Freq. Tracking:
Tunes the filter.
Transform 2:
Not Used.
F210
HarmTracker
Lots of harmonically related peaks in this one. Best tracking is obtained
with Key Center C1, and Key to Filt. Freq. Track +127.
Morph:
Increases gain of peaks.
Freq. Tracking:
Tunes the filter.
Transform 2:
Shifts balance from lower filter bands to upper.
PARAMETRIC TRACKING FILTERS
These filters are set up with various interesting combinations of peaks and
notches. The Frequency Tracking parameter controls various functions such as
bandwidth, amount and Fc.
F211
1BndPrmtrcA
Morph:
Controls Fc; range is from approx 20Hz-20kHz.
Freq. Tracking:
Higher values increase bandwidth.
Transform 2:
Values below 127 produce notches; above produce peaks.
Set Transform 2 to 127 for closest to flat response.
F212
1BndPrmtrcB
For best keyboard tracking, route Key to Morph +092, and set Keyboard
Center to C1. Set Transform 2 to 127 for closest to flat response.
Morph:
Controls Fc; range is from approx 80Hz-18kHz.
Freq. Tracking:
Values below 127 produce notches; above produce
peaks.
Transform 2:
Higher values increase bandwidth.
F213
1BndPrmtrcC
Identical to F212 1BndPrmtrcB, except that Morph can be used to control
amount of boost or cut, rather than Fc.
Morph:
Values below 127 produce notches; above produce peaks.
Freq. Tracking:
Controls Fc; range is from approx 80Hz-18kHz.
Transform 2:
Higher values increase bandwidth.
Summary of Contents for Ultraproteus
