manualshive.com logo in svg

E-Mu Ultraproteus, Operation Manual

Share
Download
E-Mu Ultraproteus Operation Manual Download Page 211

190

UltraProteus Operation Manual

Z-PLANE FILTER DESCRIPTIONS

F067

Ntches2Oct4

This filter is composed of a series of notches, tuned in octaves.

Morph & Freq. Tracking:

 Moves notches lower in frequency.

Transform 2:

 Not used.

Comments:

 Maximum shift is two octaves along either axis, for a

combined total of four octaves if both axes are modulated.

F068

Odd>+
Morph:

 Changes from odd to even harmonics.

Freq. Tracking:

 Provides key tracking to maintain spectrum.

Transform 2:

 Provides volume and brightness control.

Comments:

 Hints at odd harmonics which are then changed into a

different shape depending on the position of Transform 2.
(Transform 2 mostly respects natural changes in brightness, how-
ever.)

F069

VarSlope.4

A low-pass filter in which the rolloff above the cutoff point (400Hz) be-
comes steeper as the value for Morph Offset is increased.

Morph:

 Changes the slope of the rolloff.

Freq. Tracking:

 Moves the filter toward flat response.

Transform 2:

 Not used.

Comments:

 A good choice when more subtle filtering is desired.

EQUALIZATION FILTERS

Most of these filters are variations of traditional parametric EQ filters.

F070

BassEQ 1.4
Morph:

 Contains deep notch at 196Hz, morphing to a slight bump at

132Hz and a dip at 2600Hz.

Freq. Tracking:

 Frequency Tracking opens filter completely at maxi-

mum offset.

Transform 2:

 Not used.

F071

B BOOST.4
Morph:

 Boosts frequencies around 60Hz, sweeping to open response.

Freq. Tracking:

 Provides gentle rise at 320Hz and 5kHz.

Transform 2:

 Not used.

Summary of Contents for Ultraproteus




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands