manualshive.com logo in svg

E-Mu Ultraproteus, Operation Manual

Share
Download
E-Mu Ultraproteus Operation Manual Download Page 174

153

Chapter 10: Step-by-Step

STEP-BY-STEP

Move to the “Filter Frequency Tracking” screen and adjust the primary offset
while playing the keyboard. (You must re-key the keyboard to hear the results of
changing this value.) As specified, this parameter changes the frequency of the
filter, making it brighter as the value is increased. Feel free to adjust the morph
parameter as you adjust frequency tracking.

FILT FREQ TRACK
pri:127  sec:000

Next we'll adjust “Filter Transform 2”. On this filter, Transform 2 increases the
size of the peaks in the vocal formant. The effect of increasing the peaks is a
pronounced “nasal” quality which is quite dramatic.

FILT TRANSFORM 2
pri:127  sec:000

Now that you've explored the three main filter parameters, let's go back and
connect the keyboard to “Filter Frequency Tracking”. The keyboard is a Note-
On control. A setting of “064” is the proper setting for accurate key tracking
where the timbre will remain more or less constant up and down the keyboard.

NOTE-ON CTRL  #0
Key  064

As long as we're programming Note-On Controls, go ahead and connect Velocity
to Transform 2. The screen is shown below.

NOTE-ON CTRL  #1
Vel  127

The timbre of the sound should now change as the keyboard is played hard and
soft. Transform 2, Frequency Tracking, and the Morph are all highly interactive,
so a fair amount of adjustment may be required to get the sound just right.

FEEL FREE TO CHANGE THE

INSTRUMENT AT ANY TIME

DURING THESE EXPERIMENTS.

THEY ARE JUST THAT,

EXPERIMENTS!

Summary of Contents for Ultraproteus




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands