206
UltraProteus Operation Manual
Z-PLANE FILTER DESCRIPTIONS
F153
Bw65Hz/2k.4
This filter is similar to filter 167, but in addition to sweeping the bandwidth
of a single peak along the Morph and Frequency Tracking axes, the peak
itself is swept. The range of the frequency sweep is one octave along either
axis, although much greater ranges of change are achieved when both the
Morph and Frequency Tracking axes are combined. Effects range from
gentle, analog-style filter sweeps (with the Frequency Tracking parameter
set low), to more ‘digital’ sounding effects in which high-pitched, whistling
harmonics are produced.
Morph:
Controls bandwidth and frequency.
Freq. Tracking:
Tunes the filter.
Transform 2:
Not used.
F154
Bb80Hzbw1.4
With a Morph Offset value of ‘0’, the lowpass filter cutoff set at 400Hz, and
a wide-band bump at 80Hz. Morphing the filter increases the gain of this
bump from 6 dB to 24 dB. Frequency Tracking increases the cutoff to
19.5kHz, and decreases the bandwidth of the 80Hz bump.
Morph:
Controls bandwidth.
Freq. Tracking:
Tunes the filter.
Transform 2:
Not used.
F155
HighsTwist4
The frequencies of the poles and zeros in this filter remain constant as
Morph or Freq. Tracking are modulated, but the ‘Q’ values are modulated
in a variety of ways. The filter is closest to flat (with some emphasis in the
high frequency range and a small bump at about 200Hz) when Morph
Offset and Frequency Tracking are both set to 000. Modulating either or
both of these parameters upward emphasizes more of the highs, with
increased values for Frequency Tracking, rolling off the lows as well.
Morph:
Controls filter ‘Q’.
Freq. Tracking:
Modulate upward for thinner, brighter sounds.
Transform 2:
Not used.
F156
Cubix
Morphing this filter produces a lowpass filter sweep effect, while pushing
the Frequency Tracking parameter in a positive direction moves the filter
towards a more flat response, with a bit of subtle emphasis in the higher
frequencies.
Morph:
Produces low-pass filter effects.
Freq. Tracking:
Use to control key tracking or to set overall filter depth.
Transform 2:
Controls brightness.
Summary of Contents for Ultraproteus
