manualshive.com logo in svg

E-Mu Ultraproteus, Operation Manual

Share
Download
E-Mu Ultraproteus Operation Manual Download Page 166

145

Chapter 10: Step-by-Step

STEP-BY-STEP

Sound Delay

This function delays the onset of the note after a key is pressed and is mainly
used when a secondary instrument is also present. Go ahead and select a sec-
ondary instrument now, then come back to this screen to experiment with the
delay. A very small amount of delay can serve to give each layer its own sonic
“identity”.

SOUND DELAY
pri:000  sec:000

Applications include:

Echo Effect

 - Bring in a slightly softer version of the same instrument or

even a different instrument. Who says you have to have normal echoes?

Delayed Chorus

 - Set primary and secondary to the same instrument. Use

Delay, Fine Tuning and Sound Delay on the secondary layer.

Sound Splicing

 - Splice the attack of one sound with the body of another

using Sound Delay and Sound Start (the next subject of our investiga-
tions). Read on.

Sound Start

Sound Start removes the beginning (attack) of the sound as the value is in-
creased. It's probably time to clean the slate again. Change the preset momen-
tarily then return to the default preset (-defPreset-). Set the primary instrument
to: I008 Tine Strike, which is an electric piano sample. Now flip back to the
Sound Start screen.

SOUND START
pri:000  sec:000

As you slowly increase the Sound Start, notice how the percussive attack of the
piano disappears. The sound becomes muted.

Summary of Contents for Ultraproteus




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands