manualshive.com logo in svg

E-Mu Ultraproteus, Operation Manual

Share
Download
E-Mu Ultraproteus Operation Manual Download Page 26

16

UltraProteus Operation Manual

BASIC OPERATION

MULTI-TIMBRAL OPERATION

Multi-timbral operation means that the UltraProteus can play more than one
sound at the same time. To access multiple presets on different MIDI channels
simultaneously, follow these instructions:

1.

Set the MIDI mode to MULTI-Mode, using the MIDI mode function in the
Master menu (page 22).

2.

Decide which MIDI channels you wish the UltraProteus to receive, and
turn “All Messages” Off  for the MIDI channels that you DO NOT want
UltraProteus to receive using the MIDI Enables in the Midimap menu
(page 33). Turning “All Messages Off” turns that channel Off.

If you do not turn any channels Off, UltraProteus will receive all 16
MIDI channels simultaneously!

3.

Select the desired preset or hyperpreset for each of the MIDI channels you
wish the UltraProteus to receive using the Preset/Hyperpreset -> MIDI
Channel selection screen in the Midimap menu (page 31).

4.

Save the Midimap using the last screen in the Midimap menu.

5.

UltraProteus will now respond multi-timbrally on the MIDI channels you
have specified.

6.

The effects can be programmed and each MIDI channel assigned to an
effects bus if so desired. The volume and pan position can be adjusted for
each MIDI channel in the Midimap Volume and Pan screen. Remember to
SAVE the Midimap or all of your work will be LOST when you select
another Midimap.

PLAYING THE DEMO SEQUENCES

UltraProteus contains a play-only sequencer with 2 different sequences to give
you an idea of what is possible using this amazing instrument. Press and hold
both the Midimap and Hyper buttons. The sequence will start momentarily.
Press the Enter button to stop the sequence. Press the right cursor button to
advance to the next sequence. Sequences will cycle automatically.

DEMO  1  2
ENTER=Stop >=Nxt

Summary of Contents for Ultraproteus




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands