E-Mu Ultraproteus, Operation Manual

Page: 133 / 307

112 UltraProteus Operation Manual
PRESET MENU
A CROSSFADE BALANCE
SETTING OF 000 WOULD BE
APPROPRIATE WITH A SOURCE
SUCH AS A MODULATION
WHEEL OR FOOTPEDAL, EITHER
OF WHICH CAN ONLY CHANGE
THE VALUE IN A POSITIVE
DIRECTION.
Crossfade Direction
This function determines the polarity of the crossfade or cross-switch. The
direction is either primary -› secondary, or secondary -› primary.
XFADE DIRECTION
Pri -> Sec
Crossfade Balance and Amount
The crossfade balance parameter determines the initial balance between the
primary and secondary layers. Higher values shift the balance to the secondary
instrument. When the Crossfade Direction is Pri->Sec, Modulation subtracts
from the primary volume and adds to the secondary volume. When crossfade
modulation and balance equal 64, the two instruments are at equal volume.
The crossfade amount parameter determines the range over which crossfading
will occur. Crossfade amount is variable from 000 to 255. The larger the value,
the more modulation will be required to effect a complete crossfade.
XFADE BAL AMT
064 128
Modulation and Crossfade balance are added together to determine the mixture of
primary and secondary instruments. Higher values increase the secondary volume.
CROSSFADE SHOULD BE
TURNED OFF UNLESS A NOTE-
ON OR REALTIME
CONTROLLER IS ASSIGNED.
0 255
Pri Sec Medium Crossfade Amount
0 255
Pri Sec
0 255
Pri Sec
B Mod
B Mod
B Mod
Large Crossfade Amount
Small Crossfade Amount