manualshive.com logo in svg

E-Mu Ultraproteus, Operation Manual

Share
Download
E-Mu Ultraproteus Operation Manual Download Page 224

203

Chapter 11: Reference Section

Z-PLANE FILTER DESCRIPTIONS

F138

Krators.4
Morph: 

Provides resonant peaks at low-frequencies, morphing from

lower to higher frequency.

Freq. Tracking: 

Controls brightness.

Transform 2: 

Not used.

Comments: 

Designed to control brightness by assigning Velocity to

Frequency Tracking.

F139

Harmonix.4
Morph: 

Morphs between complex responses sweeping mid frequency

resonances while leaving edges untouched.

Freq. Tracking: 

Controls brightness and tracks keyboard.

Transform 2: 

Not used.

F140

GreenWorld4
Morph: 

A mellow low-frequency sweeper designed for piano applica-

tions.

Freq. Tracking: 

Controls brightness and tracks keyboard.

Transform 2: 

Not used.

F141

Comb/Swap.4
Morph: 

Controls a series of notches moving from 160Hz to 10kHz.

Freq. Tracking: 

Controls brightness and tracks keyboard.

Transform 2: 

Not used.

F142

Comb/HP.4
Morph: 

Sweeps between a series of low frequency notches to a high

pass response.

Freq. Tracking: 

Keyboard Tracking and brightness control.

Transform 2: 

Not used.

Comments: 

Control the brightness by assigning Velocity to Frequency

Tracking.

F143

Swirly
Morph: 

Moves from series of notches to fewer notches.

Freq. Tracking: 

Tracks keyboard.

Transform 2: 

Alters timbre of effect and adds dynamics.

Comments: 

Try a Transform 2 setting of 255 for a brighter Morph.

F144

Cavatate.4

Emphasizes frequencies from 160Hz to 2kHz.

Morph: 

Morphs to a modified high pass response.

Freq. Tracking: 

Brightness control.

Transform 2: 

Not used.

Summary of Contents for Ultraproteus




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands