E-Mu Ultraproteus Operation Manual Download

Page: 110 / 307

UltraProteus Operation Manual

PRESET PROGRAMMING

level

time

key

down

Sustain

key

released

AUXILIARY ENVELOPE GENERATOR

When the key is released, the Release phase immediately begins.

1) When a key is pressed, the envelope generator waits for the specified Delay time, then begins to increase at

the Attack rate.

2) At full level, it waits for the specified Hold time before gliding down at the Decay rate, coming to rest at the

Sustain level.

3) The envelope remains at the Sustain level until the key is released, then it glides back down to zero at the

programmed Release rate.

level

key

down

key

released

time

Summary of Contents for Ultraproteus




















































































































































































































































































































Search results

Summary of Contents for Ultraproteus

Reviews:

Related manuals for Ultraproteus

Brands by name

Popular brands

E-Mu Ultraproteus, Operation Manual

Search results

Summary of Contents for Ultraproteus

Reviews:

Related manuals for Ultraproteus

Brands by name

Popular brands