159
Chapter 10: Step-by-Step
STEP-BY-STEP
Midimap Number
Map
Hx
00 =
00
01 =
01
02 =
02
03 =
03
04 =
04
05 =
05
06 =
06
07 =
07
08 =
08
09 =
09
21 =
15
22 =
16
23 =
17
24 =
18
25 =
19
26 =
1A
27 =
1B
28 =
1C
29 =
1D
30 =
1E
31 =
1F
10 =
0A
11 =
0B
12 =
0C
13 =
0D
14 =
0E
15 =
0F
16 =
10
17 =
11
18 =
12
19 =
13
20 =
14
MORE ADVANCED SEQUENCING
Pre-Sequence Setup
Suppose that you want to have your sequencer set up everything for you before
the start of the song. Good idea. This will make the UltraProteus setup proce-
dure automatic and prevent the wrong presets from playing.
The basic idea of a pre-sequence setup is to send out a Midimap Select com-
mand just before the start of the song. Your pre-programmed Midimap will
select all the proper presets, adjust the mix and effects settings as well as the
pan positions of each preset.
Most computer-based MIDI sequencers have the ability to send MIDI SysEx data.
The ONLY way to select a Midimap remotely is to use a SysEx message. Consult
your sequencer operation manual for information on sending SysEx messages.
Note
:
UltraProteus setup information should be transmitted from the sequencer
before
the song actually starts, perhaps during a lead-in measure or countdown.
DO NOT send setup information just before the first beat of the song or MIDI
timing errors could result.
Initial Setup
1) Program a Midimap exactly the way you want it, with Channels to Preset/
Hyper, MIDI Enables and Effect Settings. Be sure to name your Midimap
so you can recognize it later.
2) SAVE the Midimap in one of the sixteen internal locations or one of the
sixteen RAM card locations.
3) Make sure the Device ID (MIDI Mode in the Master menu) is set to 00.
Otherwise UltraProteus will simply ignore the SysEx messages.
Before the Sequence Starts
Send the following MIDI SysEx messages exactly as listed.
1) Turn On Multi-Mode - Send: F0 18 0C 00 03 08 02 02 00 F7
2) Select the Midimap - Send: F0 18 0C 00 03 40 02 02 00 F7
Use the chart at right to find the proper “Hex” number (in
Bold
) to insert into
the MIDI string. For example, to select Midimap 10, you would insert the
hexadecimal number “0A” in the position shown above.
Now your song will play perfectly every time according to the parameters in the
Midimap. In addition, programs, volumes and pan positions (or anything else
for that matter) can be adjusted in realtime during the song using standard
MIDI controllers. Note: If the wrong programs are being selected, check the
MIDI Program Change Map.
NOTE: DEVICE ID 00 IS ONLY
NECESSARY FOR THE EXAMPLE
SHOWN BELOW. DEVICE ID's ARE
USED TO DIFFERENTIATE MULTIPLE
ULTRAPROTEUS UNITS ON THE
MIDI CABLE.
TO CHANGE PROGRAM BANKS
VIA MIDI SYSEX, SEND:
Bn 00 00 20 ll Cn pp
n = MIDI chan. number (0-F)
ll = Bank number (00-04)
pp = Preset in the new bank (00-7F)
Summary of Contents for Ultraproteus
