E-Mu Ultraproteus, Operation Manual

Page: 81 / 307

61 Chapter 6: Hyperpreset Menu
Zone Volume and Pan
This function sets the Volume and Pan position for each zone. Volume allows
you to adjust the relative volume between presets and pan allows you to change
the position of each zone in the stereo field. The Volume control acts as an
attenuator on the preset volume. It cannot increase the volume past the setting
programmed in the preset. The Pan control adds algebraically to the pan value
programmed in the preset. Therefore if the preset pan setting is -7, (full left) a
hyperpreset pan setting of +14 would move the sound to (+7) the extreme right
side of the stereo field.
Position the cursor under the zone number and use the data entry control to
change the zone number. Position the cursor under the volume or pan number
and use the data entry control to change the value for each zone.
VOLUME PAN Z01
127 +00
Zone Key Range
Key range sets the keyboard range associated with each of the sixteen possible
zones. The key range of each zone can be set anywhere from key C-2 to G8.
HYPERPRESET MENU
C-2 C-1 C0 C1 C2 C3 C4 C5 C6 C7 C8
= Standard 5 Octave Keyboard Range
UltraProteus Keyboard Range
MIDI
Key #
Key
Name
0 12 24 36 48 60 72 84 96 108 120 127
By placing the key ranges next to each other on the keyboard, multiple instru-
ments can be accessed simultaneously. This is called “splitting” the keyboard
because the keyboard is literally split up into different sections each containing
a different sound.
If multiple presets are placed on the same range of the keyboard, they will all be
played simultaneously. This is called “layering” since multiple presets are
layered on top of one another. This results in a very dense, “fat” sound.
KEY RANGE Z01
C-2 -> G8