manualshive.com logo in svg

E-Mu Ultraproteus, Operation Manual

Share
Download
E-Mu Ultraproteus Operation Manual Download Page 85

65

Chapter 6: Hyperpreset Menu

HYPERPRESET MENU

Hyperpresets contain a slightly different version of the function generator called
a Free-Running Function Generator or Free-Run FG. There is one Free-Run FG
per hyperpreset (effectively one per MIDI channel). What the Free-Run FG
actually controls is programmed in the preset itself.

The Free-Run FG differs from the other FGs in two fundamental ways. There is
one Free-Run FG per Hyperpreset which can modulate any presets in the hyper
which have the Free-Run FG assigned. This differs from the 2 function genera-
tors in the preset which are completely independent from note to note. Because
the Free-Run FG is like a global modulation source, it can be used when you
want to modulate multiple sounds in the same way. 

The Free-Run FG is

only active when playing a Hyperpreset.

••• SEE THE PROGRAMMING

BASICS SECTION OF THIS

MANUAL FOR ADDITIONAL

INFORMATION ON THE

FUNCTION GENERATORS.

For example, you could program the Free-Run FG to be an LFO and modulate
the pitch. All the voices in all presets in that hyperpreset with Free-Run FG
assigned would modulate up and down in unison.The Free-Run FG begins the
instant the hyperpreset is selected and continues to run until stopped by its
programming or when another hyperpreset is selected. 

If the Free-Run FG

is not programmed to loop, it simply runs to the last seg-
ment and stops!

 Because it continually runs (if so programmed) and is not

started at the beginning of a note like the preset function generators, it is called
“free-running”.

Morph

Preset 1

Volume

Preset 2

The Free-Run

Function Generator ONLY works

in a Hyperpreset.

Free-Run

FG

Hyperpreset

Free-Run

FG

Free-Run

FG

Morph

Preset 1

Volume

Preset 2

When Presets are Selected,

the Free-Run

Function Generator has No Effect

Free-Run

FG

Hyperpreset

Free-Run

FG

Free-Run

FG

The Free-Run Function Generator only works in a Hyperpreset, even though the
modulation routing is made in the preset.

Summary of Contents for Ultraproteus




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands