Draytek Vigor2912 Series User Manual Download Page 403

Page: 403 / 422

Vigor2912 Series User’s Guide

393

However, if an IP address is confirmed to be blocked due to its abnormal behavior, click the

Blocking IP List

tab to block it forever. For example, IP address “192.168.1.123” (displayed

on the following web page) will be blocked forever.

Available settings are explained as follows:

Item Description

Blocking IP

Type the IP address in this field and click

add

. It will be

added to the IP List and appear in the right frame.

IP list in the right frame will be blocked by Vigor system
permanently.

Remove

– It is used to remove selected IP address from the

Blocking IP List.

Refresh

Click this link to refresh current page.

Summary of Contents for Vigor2912 Series







































































































































































































































































































































































































































Search results

Summary of Contents for Vigor2912 Series

Reviews:

Related manuals for Vigor2912 Series

Brands by name

Popular brands

Draytek Vigor2912 Series, User Manual

Search results

Summary of Contents for Vigor2912 Series

Reviews:

Related manuals for Vigor2912 Series

Brands by name

Popular brands