Draytek Vigor2912 Series, User Manual

Page: 105 / 422

Vigor2912 Series User’s Guide 95
3. Check the box of Check to enable the Filter Rule . Type the comments (e.g., block_all ).
Choose Block If No Further Match for the Filter setting. Then, click OK .
Note: In default, the router will check the packets starting with Set 2, Filter Rule 2 to
Filter Rule 7. If Block If No Further Match for is selected for Filter , the firewall of
the router would check the packets with the rules starting from Rule 3 to Rule 7. The
packets not matching with the rules will be processed according to Rule 2.
4. Next, set another rule. Just open Firewall>>Filter Setup . Click the Set 2 link and
choose the Filter Rule 3 button.
5. Check the box of Check to enable the Filter Rule . Type the comments (e.g., open_ip ).
Click the Edit button for Source IP .