27
Manual for Data Communication dv40.fm
AT
*
DGARL=<n>
[,<cid>]
Sets host (APN) to reject
transmissions for incoming packet
communications. APN settings
use <cid> parameter defined by
“+CGDCONT”.
*2
Adds or deletes from Reject calls list with <n>
parameter. If <cid> parameter is abbreviated,
adds (<n>=0) or deletes (<n>=1) all of <cid> to
list. Adds (deletes) <cid> not defined with
“+CGDCONT” to list with this command.
n=0: Adds to list (Adds APN defined by <cid>
to Reject calls list.)
n=1: Deletes from list (Deletes APN defined by
<cid> from Reject calls list.)
AT
*
DGARL=0,1
o
OK
AT
*
DGARL?
o
*
DGARL:1
OK
AT
*
DRPW
Displays the reception power sent
from FOMA terminal.
*2
The result from this command is in the
following format.
*
DRPW:<m>
m: 0 to 75 (reception power)
AT
*
DRPW
o
*
DRPW:0
OK
AT
*
DGPIR=<n>
Setting this command is valid
when establishing
communication. Enables adding
186 (send caller ID) and 184 (not
send caller ID) to host number.
Also available in dial-up network
settings.
*2
n=0: When establishing packet transmission,
connects to a host (APN) directly
(default setting)
n=1: When establishing packet transmission,
adds 184 and connects to host (APN)
n=2: When establishing packet transmission,
adds 186 and connects to host (APN)
When 186 (send caller ID)/184 (not send
caller ID) are set by this command and in the
dial-up network settings, refer to the table on
P. 18.
AT
*
DGPIR=0
o
OK
AT
*
DGPIR?
o
*
DGPIR:0
OK
+++
Switches the FOMA terminal
mode from online data mode to
online command mode.
Escape guard interval is fixed at
one second.
*2
―
(During
communication)
+++ (Does not
appear.)
OK
AT+CACM=
[<passwd>]
Resets the total accumulated cost
recorded on the UIM.
*2
Resets the total accumulated cost recorded
on the UIM, if the password matches.
<passwd>: SIM PIN2
※
Encloses this string parameter with
quotation marks (“ ”) when entering.
AT+CACM=“0123”
o
OK
AT+CAOC=
[<mode>]
Inquires the current accumulated
cost.
*2
<mode>
0: Inquires the cost of current call.
The result from this command is in the
following format.
+CAOC:“<ccm>”
AT+CAOC
o
+CAOC:“00001E”
OK
AT+CBC
Inquires the battery status.
*2
The result from this command is in the
following format.
+CBC:<bcs>,<bcl>
<bcs>
0: The battery operates the FOMA terminal
1: Charging the battery
2: The battery is unconnected
3: Reducing the power
<bcl>
0
〜
100 (remaining battery power)
AT+CBC
o
+CBC:0,80
OK
AT+CBST=[<sp
eed>[,<name>[,
<ce>]]]
Sets the bearer service when
establishing transmission. This
setting is only valid when
AT+FCLASS=<n> command
(
n
P. 30) = 0.
*1
<speed>
116: 64K data communications (default
setting)
<name>
1: fixed value
<ce>
0: fixed value
AT+CBST=116,1,
0
o
OK
AT+CEER
Displays disconnection reason for
preceding communication
session.
*2
Refer to “Reasons for Disconnection”.
(
n
P. 34)
AT+CEER
o
+CEER:36
OK
AT+CGDCONT
Sets host (APN) accessed when
establishing packet
transmission.
*2
Refer to “More on AT Commands”.
(
n
P. 34)
Refer to “More on
AT Commands”.
(
n
P. 34)
AT Command
Overview
Parameter/Explanation
Execution
Example
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[M]
[M]
Manual for Data Communication dv40.fm 27 ページ ２００６年１０月１０日 火曜日 午後８時４６分
