150
e07_dv40_7e.fm
Security Settings
Change the PIN1 and PIN2 codes on FOMA card. PIN1 and PIN2 codes are saved to the FOMA card.
PIN1 code is a four- to eight-digit security code that prevents unauthorized use of the FOMA card. PIN2 code
is a four- to eight-digit security code used for authentication when connecting to sites, Internet and online
services. Enter when performing Client certificate operations (issuance of Client certificate to use FirstPass)
or accessing FirstPass compatible sites (
n
P. 209).
Enter the four- to eight-digit number for PIN1/PIN2 code. (
n
P. 146)
Set to require PIN1 code entry when turning on the FOMA terminal to prevent unauthorized use.
J
Entering PIN1 code when power is turned on
Set PIN1 code input set to
ON
and PIN1 code entry screen appears when the power is turned on.
Enter PIN1 code to operate FOMA terminal. Prevents unauthorized use of the handset.
UIM Settings
Setting PIN Code
Default setting
PIN1 code:
0000
, PIN2 code:
0000
Note
PIN1 code/PIN2 code is locked if incorrectly entered three times in PIN1 code/PIN2 code entry screen.
Disable PIN lock. When disabling PIN lock, new PIN1 code/PIN2 code must be entered. (
n
P. 151)
If three consecutive PIN2 code entry errors are made and the FOMA terminal is locked, the handset continues
to receive a signal and can make/receive calls and send/receive mail. However, if three consecutive PIN1 code
entry errors are made, the FOMA terminal is locked and functions that require a signal are disabled.
Setting Handset to Require PIN Code Entry When Power Is Turned
On
<PIN1 Code Input Set>
Default setting
OFF
1
In stand-by, press
t72
, enter terminal security code and press
t
.
FOMA card
settings screen
2
Press
1
[PIN1 code input set] and select
ON
or
OFF
.
PIN1 code can be entered up to three times.
Rest X times
appears on PIN1
code entry screen.
1
Press
H
(Power) for 2+ seconds to turn on handset, enter PIN1
code and press
t
.
PIN1 code can be entered up to three times.
Rest X times
appears on PIN1 code entry screen.
Enter correct PIN1 code to show the stand-by display.
Changing PIN1/PIN2 Code
<Change PIN1 Code/PIN2 Code>
1
In stand-by, press
t72
, enter terminal security code and press
t
.
When PIN1 code input set is set to
OFF
, PIN1 code cannot be changed.
To set
1
→
enter PIN1 code
→
t
To disable
2
→
enter PIN1 code
→
t
dv40̲e.book 150 ページ ２００６年１０月１１日 水曜日 午前８時３１分
