256
e11_dv40_7e.fm
i-
a
ppli
2
Select
Network set
, press
t
and
select whether to transmit data or not.
3
Press
i
[Complete].
For each i-
a
ppli software, set whether the
software should be notified regarding icons
indicating unread mail and Message R/F, battery
level, Manner mode setting and whether the
handset is inside or outside the service area.
This setting is valid only for software that uses icon
information.
Icon information is set to
Yes
when software is
downloaded.
1
In the software list (
n
P. 254),
select software and press
C6
[Set software use].
2
Select
Icon info set
, press
t
and
press
1
[Yes].
3
Press
i
[Complete].
Set whether to allow the i-
a
ppli software to
access the phonebook, Redial and Received
calls. Setting this to
Yes
allows the i-
a
ppli to
access the phonebook, Redial and Received calls
automatically.
This setting is valid only for software that accesses the
phonebook and history information.
Yes
is set when software is downloaded.
1
In the software list (
n
P. 254),
select software and press
C6
[Set software use].
2
Select
Allow access to phone book/
call records by software
, press
t
and press
1
[Yes].
3
Press
i
[Complete].
Set whether to allow the i-
a
ppli software to
change the ring tone and screen, and whether to
show a confirmation screen when making the
changes. Setting this to
Yes
allows the i-
a
ppli to
change the ring tone and screen automatically.
Change tone/image is set to
Yes
and Change tone/
image confirmation screen is set to
No
when software
is downloaded.
1
In the software list (
n
P. 254),
select software and press
C6
[Set software use].
2
Select
Allow ring tone/image/icon
changes by software
, press
t
and
press
1
[Yes].
To not allow changes, press
2
and proceed to
step 4.
3
Select
Confirm all changes
, press
t
and press
1
[Yes].
To not show a confirmation screen, press
2
.
4
Press
i
[Complete].
Yes (transmit)
1
No (not to transmit)
2
To check upon i-
a
ppli startup
3
Note
Software may not function properly and information
may not be available in a timely manner if Network
set is set to
No
. This may also prevent the software
from starting.
Because images used with the i-
a
ppli software and
entered data is sent over the Internet, some of this
information may be viewed by a third party. (Images
used with the i-
a
ppli software include images shot
using the camera function operated with i-
a
ppli,
images acquired using the Ir exchange function
operated with i-
a
ppli and images viewed and
retrieved from
Data box
operated with i-
a
ppli.)
Configuring the Icon Information
Setting
<Icon Info Set>
Note
i-
a
ppli requiring use of icon information may not
function properly if set to
No
.
If Icon info set is set to
Yes
, the icon status for
unread mail/Message R/F, battery level, Manner
mode, and inside/outside the service area may be
sent via the Internet to the IP (Information Provider)
along with terminal ID and UIM ID, and this
information may be viewed by a third party.
Configuring the Phonebook and History
Access Setting
<View Phonebook/History>
Note
Setting this to
No
may prevent operation of some
i-
a
ppli software.
Configuring the Ring Tone and Screen
Change Setting
<Change Tone/Image>
dv40̲e.book 256 ページ ２００６年１０月１１日 水曜日 午前８時３１分
