156
e07_dv40_7e.fm
Security Settings
Three locks, Keypad dial lock, Function lock and IC card lock can be set at once.
Refer to Keypad dial lock (
n
P. 155), Function lock (
n
P. 154) or IC card lock (
n
P. 276) for details of
each lock function.
Three locks, Keypad dial lock, Function lock and IC card lock, can be automatically set when
Power saver mode is activated in stand-by or when the FOMA terminal is closed.
Multi Easy Lock
Setting Keypad Dial Lock, Function Lock and IC
Card Lock by One-touch Operation
1
In stand-by, press
t
for 1+ seconds, select
Yes
and press
t
.
Keypad dial lock, Function lock and IC card lock are set, and
W
and
Y
appear.
Note
When
Reject unknown
is set, phonebook
Function lock
is not set even if Multi easy lock is set.
Disabling Multi Easy Lock
1
In stand-by, press
t
for 1+ seconds, enter terminal security code
and press
t
.
Note
Alternatively, select each lock function in lock settings screen (
n
P. 152) to disable individually.
Multi Lock Auto-set
Setting Multi Easy Lock Automatically
Default setting
OFF
1
In stand-by, press
t76
, enter terminal security code and press
t
.
2
Press
5
[Multi lock auto-set], select
ON
or
OFF
and press
t
.
Note
Automatically Multi lock auto-set can also be disabled by the same operation as “Disabling Multi Easy Lock”
on P. 156.
Disabling Multi easy lock does not set Multi lock auto-set to
OFF
. If the FOMA terminal is closed or Power
save mode is activated, Multi easy lock is set again.
dv40̲e.book 156 ページ ２００６年１０月１１日 水曜日 午前８時３１分