158
e07_dv40_7e.fm
Security Settings
When Secret mode is set, normal and Secret phonebook, Schedule and ToDo list data are shown.
Only normal data is shown when Secret mode is disabled.
Set to automatically disable Secret mode if Power saver mode activates when in stand-by or FOMA terminal is
closed when in stand-by.
Secret mode is disabled when power is turned off.
For details on entering secret data, refer to P. 113 for phonebook, P. 372 for Schedule and P. 376 for ToDo list.
Only accept calls from specified callers. Calls from all other numbers (including those
without caller ID) are not connected.
To set Accept calls, save numbers from the phonebook to a list and set all numbers at once
afterwards. Numbers can be added and the list can be edited later.
Even if the caller is on the Accept calls list, the call is not connected if caller ID is not sent. It is recommended
to set Caller ID Request Service (
n
P. 393).
Phone numbers set for Reject calls, Reject unknown, Reject user unset, Reject payphone and Reject
unsupported ID cannot be set for Accept calls.
Callers not on the Accept calls list hear a busy signal.
xx missed call(s)
appears and the caller’s name or
phone number is recorded in Received calls.
While Function lock is applied to phonebook, Accept calls is disabled and all calls are connected.
SMS and i-mode mail are received normally.
FOMA card phonebook numbers cannot be set. Only numbers in the FOMA terminal handset phonebook are
available.
Accept calls operate as it is set also when PushTalk is received. However, when PushTalk Plus is used,
receiving PushTalk from a network phonebook does not follow the Accept calls setting.
Save up to 20 phone numbers.
Secret Mode
Viewing Information Set as Secret
Default setting
OFF
1
In stand-by, press
t71
, enter terminal security code and press
t
.
2
Select
ON
or
OFF
.
When Secret mode is set,
R
appears in the upper part of the display.
Accept Calls
Receiving Calls from Only Specified Phone Numbers
Saving Phone Numbers to Accept
1
In stand-by, press
t73
, enter terminal security code, press
t
and press
1
[Accept calls].
When
Disable reject calls
appears, phone number is set to be rejected. Disable and try again.
(
n
P. 161)
When
Disable reject calls
appears, phone number is set to be rejected due to Reject unknown,
Reject user unset, Reject payphone or Reject unsupported ID settings. Disable and try again.
2
Press
3
[Save list].
If another person is already saved, name appears.
To set
To not automatically disable
11
To automatically disable
12
→
t
To disable
2
dv40̲e.book 158 ページ ２００６年１０月１１日 水曜日 午前８時３１分
