16
Manual for Data Communication dv40.fm
The host (APN) registered to the first and third cid
cannot be deleted. (When the third number (cid) is
selected and
削除
(delete) is clicked, the number is not
actually deleted. The number returns to
mopera.net
.)
J
Saving to a file
Select
ファイル
(File) from the toolbar to back up
the host (APN) settings registered to the FOMA
terminal or to save settings being edited.
J
Loading settings from a file
To load saved host (APN) settings in order to re-
edit them or write them onto the FOMA terminal,
select the appropriate function from the
ファイル
(File) menu on the toolbar.
J
Writing host (APN) information onto
the FOMA terminal
To write the indicated host (APN) setting to the
FOMA terminal, click
FOMA
端末へ設定を書き込
む
(Write settings onto FOMA terminal) on the
Host (APN) setting screen.
J
Creating dial-up settings
On the host (APN) settings screen, select an added
or edited host (APN) and click
ダイヤルアップ作成
(New dial-up). A screen confirming the writing of
the setting to the FOMA terminal appears. Click
は
い
(Yes). After the setting is written to the host
(APN), the
パケット通信用ダイヤルアップの作成
(New dial-up for packet transmission) screen
appears.
Enter a connection name and click
アカウント・パ
スワードの設定
(Set account and password). (Can
be left blank to connect when using mopera U or
mopera.)
Enter a
ユーザー名
(User name) and
パスワード
(Password) and specify the users to whom rights
are granted and click
OK
.
If the IP and DNS information from your provider
are available, click
詳細情報の設定
(Advanced),
enter the necessary information and click
OK
.
After entering the information, click
FOMA
端末へ
設定を書き込む
(Write settings onto FOMA
terminal), confirm that the old setting is to be
overwritten and then write the settings.
This section describes how to set up packet
transmission and 64K data communications
without using the FOMA PC Setup Software.
To make the settings, communication software for
entering AT commands are required. “Hyper
Terminal”, which is included as standard with
Windows, is used here.
The flow for setting up with use of AT commands is as
follows.
To use 64K data communications, there is no host
(APN) setting.
Set the host (APN) for using packet transmission.
Register up to 10 numbers. Hosts are managed
using cid numbers from 1 to 10 (
n
P. 17).
The default setting for the first cid is
mopera.ne.jp
, the APN used to connect to
mopera. The setting for the third cid is
mopera.net
, the APN used to connect to mopera
U. Save hosts (APN) to cid2 or 4 to 10.
Communication Settings
Without the FOMA PC Setup
Software
Setting Communications for Packet
Transmissions and 64K Data
Communications
Note
Install communication setting file before making
settings for packet transmission and 64K data
communications. (
n
P. 4)
AT commands are commands for controlling the
modem. The FOMA terminal is compliant with AT
commands and also supports some extended
commands, as well as some unique AT commands.
Making host (APN) settings is not necessary when
using mopera U or mopera, the DoCoMo Internet
Connection Service, since it is set as the default.
Set Notify caller ID as necessary. (When using
mopera U or mopera, set
Send
.) The default setting
is
Not send
.
Set other settings as necessary. Use is possible with
the default settings.
Setting the Host (APN)
Start up communication software that supports AT
commands
(steps 2 to 5)
Set the Dial-up
Network
(
n
P. 18)
End communication software
(
n
step 7 on P. 17)
Set the host
(APN)
(
n
steps 6 and
7 on P. 17)
Send/Not send
caller ID
(
n
P. 18)
Manual for Data Communication dv40.fm 16 ページ ２００６年１０月１０日 火曜日 午後８時４６分
