403
e20_dv40_7e.fm
Text Input
Continued on next page
??
J
1-character conversion
After a kanji has been entered, characters will convert to
that kanji next time when the first character is entered.
J
When the kanji cannot be found
<1 kanji conversion>
Enter a single kanji by its on or kun reading.
1
In text input screen, enter hiragana
and press
i
[1 kanji].
2
Select kanji and press
t
.
J
Quickly specifying character string
<1-touch conversion>
Use 1-touch conversion to convert kanji using all
the hiragana combinations assigned to each key.
The same key does not need to be pressed
multiple times for the hiragana.
Example: When entering
おはよう
1
In text input screen, press
168
1
.
1-touch conversion
works best with nouns.
For characters with
dakuten/handakuten
marks, press the key for
the unmarked character
once, then enter the
dakuten/handakuten
mark. (Example: for
勉
強
, enter
6*0
281
.)
2
Press
o
.
Press
i
[
⇐
Reslct] or
C
[Reslct
⇒
] in 1-touch
conversion status to
change the
pre-converted
characters to convert.
Further conversion is
1-touch conversion.
The character strings
used most frequently
appear first in the list.
When candidates
appear, press
c
to return to the pre-converted
hiragana. If
p
is pressed, normal conversion
candidates appear.
Related Operations
Add dakuten (
゛
)
Enter character
?
*
.
Add handakuten (
゜
)
Enter character
?
**
.
Convert to lower case
Enter character
?
m
[Caps].
Add a space at the end of message
Press
r
at the end.
Undo entry
<Undo>
Enter text
?
operation (delete, cut)
?
s
.
Change font size
<Font size>
1
In text input screen, press
C
?
Chara entry/
dict
?
t
?
2
.
2
Press
1
[Large font],
2
[Default] or
3
[Small font].
View key list
<Key list>
In text input screen, press
C
?
Key list
?
t
.
Note (Related operations)
Dakuten and handakuten
For single-byte katakana, press
*
once for dakuten
(
゛
), twice for handakuten (
゜
), three times to add a
prolonged sound (
ー
) and four times for a line break
(
K
). Press five times to return to dakuten (
゛
). The
added marks count as one character.
For double-byte hiragana, press
*
once for a
dakuten (
゛
), twice for a handakuten (
゜
), and three
times to restore the original character.
Lower case
For alphabet, text is converted to lower case. The
entry mode is also switched to lower case.
Entering a space
A single-byte space will be entered regardless of
input mode. Each space counts as one character.
Undo operation
If
s
is pressed 11+ times,
UNDO Unable to undo
anymore
appears and the screen 10 times before
reappears. When entering message, undo is
available only once.
After text is edited, operations in memory are cleared.
Undo is not valid when characters that can be
entered are only single-byte alphanumeric
characters in the mail address entry screen, etc.
Font size
Font size setting is not available in some text input
screens.
Large font
is 24 pixels,
Default
is 20 pixels and
Small font
is 16 pixels. In the input screen for saving
to phonebook,
Small font
is 12 pixels.
When Decorate mail is selected from the submenu in
the message entry screen, the font size can be
changed to that with one size larger or smaller pixels.
Available pixels are 30, 24, 20, 16 and 12 pixels.
Also set display font width. (
n
P. 143)
Note
There are 6,355 kanji available from JIS level-1/
level-2 kanji sets.
Complex kanji are changed in part or are excluded.
dv40̲e.book 403 ページ ２００６年１０月１１日 水曜日 午前８時３１分