381
e17_dv40_7e.fm
Other Useful Functions
* Input a numerical value and then press
#
to
switch b and -.
Press
c
to erase all entered numbers. (Press
c
to end when number is 0.)
3
Select calculation.
Mathematical functions
are allotted to guide
key.
Also perform the
following.
4
Enter numbers to calculate and
press
t
[=].
Press
H
to end Calculator. The stand-by
display reappears.
Check previous or total call duration/charge
for voice calls, Videophone calls, etc.
Voice call duration, Videophone call duration and 64K
data communication duration appear for call duration.
Duration time includes calls made and received.
Call charge includes only calls made. When calls are
made to toll-free numbers, directory assistance (104),
etc.,
0YEN
or
bbbbbb
YEN
appears.
Call charges for switching between Videophone and
voice call appear as Last call cost ¥
○○
and V.phone
call cost ¥
○○
. Charges for calls switched multiple
times appear for each voice/Videophone call in total.
Call charge is saved on the FOMA card. If a different
FOMA card is inserted, the total call charges stored
(those calculated since December 2004) on the
currently inserted card appears.
※
Total call charges on a FOMA card cannot be
viewed on models released prior to the FOMA 901i
series. (However, total charge is saved on the
FOMA card.)
Call duration/charge that appears can be reset.
Call duration/charge is an estimate and may differ
from actual amount. Call charge does not include
consumption tax.
Enter the four- to eight-digit number for PIN1/PIN2
code. (
n
P. 146)
1
In stand-by, press
t47
.
While accessing the
FOMA card,
Reading
UIM data
appears.
If the information has
never been reset,
--/--/
----(--)--:--
appears for
the reset date and time.
When total call charge
is reset, the charges at
the time of resetting are
saved for the reset date
and time.
Press
H
to end viewing.
0
to
9
Numbers 0 to 9
*
Decimal point
#
Switch b and -*
q
＋
Add
r
−
Subtract
o
×
Multiply
p
÷
Divide
m
CM
Clear
memory
a
RM
Recall
memory
i
％
Calculate
percentage
s
TAX
Calculate
tax
C
M+
Add
memory
Note
The stand-by display does not reappear when
Alarm
,
Schedule alarm
or
ToDo alarm
activates
while Calculator is being used. Calculator reappears
after Alarm operation ends.
Results are retained if memory is used.
Related Operations
Change tax rate
In Calculator, press
s
(for 1+ seconds)
?
enter
tax rate (01 to 99)
?
t
.
Calculate tax
Display results and press
s
[TAX].
To calculate amount without tax: Display results
and press
s
[TAX]
s
[TAX] (-TAX).
Copy calculation contents
Press
*
for 1+ seconds during calculation.
Note (Related operations)
Calculating tax
The default setting for tax rate is
5%
.
The amount after the decimal point is rounded off.
Example: If 120
s
[TAX] is pressed,
5Tax
appears.
Calculator
Talk Time/Cost
Displaying the Call Duration/
Charge
Displaying the Call Details
Note
Transmission duration and charge for PushTalk
transmission, i-mode and packet transmissions are
not counted. Refer to “Mobile Phone User’s Guide
[i-mode]” for details on checking i-mode charge.
If previous call duration exceeds 9:59:59, the counter
restarts from 0:00.
If total call duration exceeds 999:59:59, the counter
restarts from 0:00.
Time used receiving or making a call is not counted.
Last call cost is reset to
bbbbbb
YEN
when the
power is turned off.
Transmission charges for Chaku-moji are not included.
dv40̲e.book 381 ページ ２００６年１０月１１日 水曜日 午前８時３１分
