62
e03_dv40_7e.fm
Phone/Videophone
Reconnect control is also available for PushTalk transmissions.
It is recommended that this function be kept set to
ON
.
Use the FOMA in-car hands-free kit 01 (sold separately) to connect hands-free devices such
as car navigation to the FOMA terminal, and make/receive voice calls from the device.
Refer to the user’s guide of each product for more details. Use a FOMA In-car hands-free
cable 01 (sold separately) for the in-car hands-free kit 01 (sold separately).
Note
If
b
is entered at the beginning of a phone number or after
184
,
186
or a prefix, the numbers after
b
are
recognized as the phone number.
Reconnect Control
Reconnecting Disconnected Calls Automatically
Default setting
Alarm on (high)
1
In stand-by, press
t612
and select an alarm tone.
Note
The amount of time that can elapse to reconnect varies depending on signal strength. The estimated time is
approximately ten seconds.
The other party hears no sound until the call is reconnected (up to ten seconds). Charges are incurred for
this duration.
Noise Reduction
Reducing Noise Interference to Hear Calls Clearly
Default setting
ON
1
In stand-by, press
t611
and
1
[ON].
Note
Noise reduction processes sound to make conversations clearer. Sound quality may vary depending on
surrounding noise and tone of the voice.
Hands-free
Using Handset in a Car
Note
Functions such as display settings, ring tones and
Public mode (Drive mode)
call functions follow the
FOMA terminal settings for incoming calls.
If a hands-free device has sound enabled, the device plays a ring tone even when the FOMA terminal is set
to Manner mode or
Silent
.
When a Videophone call is made from the
Phonebook
or
Redial
, the transmission speed follows device
settings. When the speed is not set, Videophone calls are made at 64K.
When a Videophone call is made or received using a hands-free compatible device, a substitute image is
sent to the other party.
To set alarm to high
1
To set alarm to low
2
To set alarm to off
3
dv40̲e.book 62 ページ ２００６年１０月１１日 水曜日 午前８時３１分