38
e02_dv40_7e.fm
Before Using the FOMA Terminal
Use the battery pack SH09 exclusive to the FOMA terminal.
J
Inserting the battery pack
Close and hold the FOMA terminal in your both hands before removing.
J
Removing the battery pack
Turn the power off, close and hold the FOMA terminal in your both hands before removing.
Inserting and Removing the Battery Pack
1
Lightly press back cover in the
direction of the arrow (
1
) and
slide approximately two mm (
2
).
2
Lift the back cover in the
direction of the arrow (
3
) and
remove it.
3
Insert the battery pack (
4
).
The battery pack has tabs that make it easy
to insert. Insert the battery pack with
character side as the product name (SH09)
facing up.
4
Reattach the back cover (
5
).
Position the handset and the back cover as
shown in the illustration and then press the
back cover and slide into place.
1
Follow steps 1 and 2 of
“Inserting the battery pack” on
P. 38 to remove the back cover.
2
Remove the battery pack.
The battery pack has a tab that makes it
easy to remove. Press the tab with your
fingers without placing too much force. Lift
the battery pack to remove.
Note
Using unnecessary force when inserting or removing the battery pack may damage the battery pack and
connection terminal (charger terminal) on the FOMA terminal.
Refer to the battery pack SH09 user’s guide for details.
Firmly close the back cover. If not closed firmly, the back cover may come off and the battery pack may fall
out due to vibration.
If the battery pack connection terminal side or FOMA terminal battery pack (charger terminal) is dirty, the
FOMA terminal power may turn off. Additionally, the battery may not be sufficiently recharged. Wipe off any
dirt with a dry cloth or cotton swab.
1
3
2
Character side as the product name,
SH09 facing up
4
Tabs
5
Tabs
Battery pack
connection
terminal side
Battery pack
Tab
dv40̲e.book 38 ページ ２００６年１０月１１日 水曜日 午前８時３１分
