45
e02_dv40_7e.fm
Before Using the FOMA Terminal
Set the date and time on the FOMA terminal. Set to automatically correct the date and time.
For overseas use, the settings are automatically corrected to the local date and time.
Date Settings
Setting the Date and Time
Default setting
Auto time correction:
ON
1
In stand-by, press
t34
.
When Limit settings is set to
Enable
, terminal security code is required to set
date and time.
Times appear in 24-hour format.
2
Select
Auto time correction
, press
t
, and select
ON
or
OFF
.
Note
The date and time that are set are saved even if the battery pack is removed, but if the battery pack remains
removed for approximately two weeks or more or the battery remains empty, the settings may be reset.
When this happens, set again after charging the battery.
If the date and time are not set correctly, dates are not correctly recorded for
Redial
,
Received calls
,
Record message (voice/Videophone calls)
, and camera image titles/shooting date. In addition, functions
that use the clock, such as
Auto power ON/OFF
,
Alarm
,
Schedule
,
SSL
(authentication),
i-
a
ppli Auto
start
or
starting i-
a
ppliDX
cannot be used properly.
When setting reset notification for Limit settings and the date is set to the following month or later,
Reset
time passed
appears in stand-by.
When Auto time correction is set to
ON
The FOMA automatically adjusts the time by connecting to the DoCoMo network’s time information.
When Auto time correction is set to
ON
, the time is sometimes not adjusted for a while. To activate Auto time
correction, turn off FOMA terminal power and restart.
Time is not adjusted depending on the signal status.
Time may be off by a few seconds.
When time correction information is received during overseas use, a message appears notifying that the
corrected time is different from the previously received time if different. Select
Yes
and press
t
to start
correcting time difference. Select
No
and press
t
to not start correcting time difference. To correct time
difference after selecting
No
, turn off the FOMA terminal power and restart.
When time difference is adjusted overseas, the local time and date appear in
Redial
,
Received calls
,
Received messages histories
(excluding i-mode mail) and Received messages list, and
!
appears. The
received messages are not displayed in order of the displayed time and date but the mail reception.
!
does not appear in the
Outbox
and
Unsent messages
for mail messages. If the date order display is set
for the Outbox or Unsent messages, sent messages are saved in the order of sending.
Time correction may not be performed depending on the overseas network.
When Auto time correction is set to
ON
and time correction information is being received from an overseas
network during overseas use, Japan time and local time appear (dual display). When Auto time correction is
set to
OFF
, only manually set time appears.
A time correction confirmation screen may appear after returning to Japan. Select
Yes
and press
t
to start
correcting time difference. Select
No
and press
t
to not start correcting time difference. To retrieve Japan
time after selecting
No
, turn off the FOMA terminal power and restart.
To automatically correct date and time Select
ON
→
t
→
i
To enter date and time
Select
OFF
→
t
→
Date
→
t
→
enter date
→
t
→
Time
→
t
→
enter time
→
t
→
i
Use 24-hour format. When entering month, day and time, add
0
before numbers one through nine (example: 01, 02, 03, etc.).
Alternatively, select numbers with
u
. If you make a mistake,
move the cursor using
v
and re-enter.
dv40̲e.book 45 ページ ２００６年１０月１１日 水曜日 午前８時３１分