23
Manual for Data Communication dv40.fm
3
Double-click the connection icon.
The connection screen appears.
Select the host icon and then select
接続
(Connect) in the
ファイル
(File) menu to
display the connection screen.
4
Confirm the settings and click
ダイ
ヤル
(Dial-up).
The FOMA is connected to the host.
The phone number set in “Setting the Dial-up
Network” (
n
P. 18) appears in the
ダイヤル
(Dial-up) field.
When using mopera U or mopera,
ユーザー名
(User name) and
パスワード
(Password) can
be left blank to connect.
J
Disconnecting
Simply closing the browser may not disconnect
the connection. Follow the steps below to
properly disconnect.
1
Click
in the task tray and click
切
断
(Disconnect).
The connection is disconnected.
The FOMA terminal has OBEX as a data
communication protocol. OBEX data communication
enables sending and receiving phonebook, owner
information from the Own number screen, Schedule,
ToDo list, sent mail (including SMS), received mail
(including SMS), unsent mail (including SMS), text
memos, melodies, My picture, i-motion and bookmark
data to and from a PC. The FOMA SH903i is also
equipped with an Ir exchange function. Send and
receive phonebook entries or data from received mail
to/from other FOMA terminals also equipped with the
Ir exchange function. Also, transfer data using
microSD Memory Card.
Use the following three types of data communication
with the FOMA terminal.
Send data one item at a time, from a PC to a FOMA
terminal (Write 1).
Send data in bulk, from a PC to a FOMA terminal
(Write all).
Send data in bulk, from a FOMA terminal to a PC
(Read all).
During data communication, the handset will be
outside the service area, and functions such as voice/
Videophone call, i-mode, i-mode mail, packet
transmission, and PushTalk will not be available.
Even after completion of data communication,
A
(outside the service area) may be displayed for a short
time.
Sending and Receiving Data
(OBEX)
Sending/Receiving FOMA Terminal
Data to/from a PC
Note
Make sure the FOMA terminal is properly connected
to the PC. If not connected properly, sending and
receiving data may not be possible, or data may be
lost.
Check whether there is enough remaining battery
power of the FOMA terminal. If data communication
is performed when the battery level is low or empty,
sending and receiving data may not be possible, or
data may be lost. Performing operations while
charging the FOMA terminal in the desktop holder is
recommended.
Check the PC power supply as well. If not turned on,
sending and receiving data may not be possible, or
data may be lost.
Perform data communication with the FOMA terminal
in stand-by. When movie/i-motion is set as the stand-
by display, stop movie/i-motion playback before
performing data communication.
During communication (voice/Videophone call, data
communication, and PushTalk), data cannot be sent
or received. Also, when sending and receiving data,
other data communication cannot be performed.
However, receiving a call, right after data
communication has begun, may be possible. In such
cases, the sending or receiving of data is canceled.
Manual for Data Communication dv40.fm 23 ページ ２００６年１０月１０日 火曜日 午後８時４６分