285
e13_dv40_7e.fm
GPS Function
Continued on next page
??
Set the host for the GPS service setting site.
※
Setting does not normally need to be changed.
1
In stand-by, press
t9276
4
, enter terminal security code
and press
t
.
2
Select
2
[User specified host], press
C
[Check] and press
C1
[Edit].
Host name entry screen appears.
To return to the default host, press
1
[Default]. To change to the preset user-defined
host, press
2
[User specified host].
3
Enter the host name and press
t
.
Enter up to 99 single-byte alphanumeric
characters and symbols.
4
Enter the host address and press
t
.
Enter up to 100 single-byte alphanumeric
characters and symbols.
5
Press
c
and
2
[User specified
host].
The host is changed.
Connect to the GPS service setting site and
configure the setting required for Location provision.
1
In stand-by, press
t92763
.
Connected to the GPS service setting site.
2
Configure the settings.
Please contact GPS Service providers for the
setting details.
Location provision starts when the request to
provide the location information is received.
When Location provision is allowed (when GPS Service
settings are set to
許可
(Always allow) or when Location
usage setting (imadoko-search setting) accessed by
iMenu
→
料金＆お申込・設定
(Charges & Subscription,
Settings)
→
オプション設定
(Options)
→
位置情報利用
設定
(Location usage setting) is set to
許可
(Always
allow)), the location information is automatically provided
upon request.
When Location provision is chosen (when GPS Service
settings are set to
毎回確認
(Always choose) or when
Location usage setting (imadoko-search setting) accessed
by
iMenu
→
料金＆お申込・設定
(Charges &
Subscription, Settings)
→
オプション設定
(Options)
→
位
置情報利用設定
(Location usage setting) is set to
毎回確
認
(Always choose)), a confirmation screen asking
whether to provide appears at every request. Select
Yes
and press
t
to start providing the location information.
To cancel providing the location information, press
c
while providing. However, the location information may
be sent depending on timing.
Sent location information may not reach a requestor of the
location information depending on the signal strength.
Host ID for Location provision may not be displayed on
the screen.
Notify the positioned Location information of
the present location to specified service
clients (service provider supporting Location
notification).
See the information of a service provider supporting
Location notification or DoCoMo web page. In addition,
subscription to a service provider supporting Location
notification and a service usage fee may be required.
Sent location information may not reach a service
provider depending on the signal strength.
Using Location notification is charged.
1
In stand-by, press
t92751
.
2
Select a service client and press
t
.
The present location is notified to the selected client.
To directly enter a service client, select
Direct
input
, press
t
, enter ID and press
t
.
Setting Host
<Host Setting>
Default setting
Default
Related Operations
Delete the user-defined host
<Delete>
In the host setting screen, select
User
specified host
?
C
[Check]
?
C2
.
GPS Service Settings
<Service Settings>
When the Location Information Is
Requested
Host setting screen
Note
When the location information is requested
while in Public mode (Drive mode)
If Location provision is set to
許可
(Always allow) for
usage settings of each service, a notification screen and
then the GPS positioning screen are displayed and the
location is provided after GPS positioning. However,
Location provision/accept, Location provision/notify,
vibrator or called LED does not operate.
When Location provision is set to
毎回確認
(Always
choose) for usage settings of each service, location
information is not provided.
Location Notification
Notifying Present Location
dv40̲e.book 285 ページ ２００６年１０月１１日 水曜日 午前８時３１分
