DKL L2-S300 Operating Instructions Manual Download Page 73

Page: 73 / 327

Qualifications of the user

We have based our development and design of the medical device on the dentists, dental hygienists, dental

employees (prophylaxis) and dental assistants target group.

Production according to EU Directive

The medical device meets the requirements of Directive 93/42/EEC.

Responsibility of the manufacturer

The manufacturer can only accept responsibility for the safety, reliability and performance of the medical device

when it is used in compliance with the following directions:

> The medical device and the supply hose must be used in accordance with these Instructions for use.

> The medical device and the supply hose has no components that can be repaired by the user. Assembly,

modifications or repairs must only be undertaken by an authorized W&H service partner (see page 44).

Summary of Contents for L2-S300








































































































































































































































































































































Search results

Summary of Contents for L2-S300

Reviews:

DKL L2-S300, Operating Instructions Manual, Page: 73 / 327

Search results

Summary of Contents for L2-S300

Reviews: