DKL L2-S300 Operating Instructions Manual Download Page 180

Page: 180 / 327

Foot control S-NW

Green – SPI dongle activated

LED on if the SPI dongle is connected and the control unit is switched on.

Orange – battery

LED flashes if the batteries on the foot control need to be replaced.

Blue – pairing

The foot control S-NW and the SPI dongle are paired in default status.

If pairing is active: LED indicator flashes
If pairing is inactive:



Press and hold the button on the SPI dongle for 4 seconds.



LED indicator flashes. SPI dongle is in pairing mode for 30 seconds.



Press and hold the green and orange buttons simultaneously on the S-NW foot control.



LED flashes three times when pairing is successful.

Disable pairing

Press and hold the green, orange and yellow buttons simultaneously on the foot control S-NW for at least three seconds.

Switching between multiple control units

Press the orange/middle button for 3 seconds.

Description of SPI dongle

Summary of Contents for L2-S300








































































































































































































































































































































Search results

Summary of Contents for L2-S300

Reviews:

DKL L2-S300, Operating Instructions Manual, Page: 180 / 327

Search results

Summary of Contents for L2-S300

Reviews: