DKL L2-S300, Operating Instructions Manual, Page: 22 / 327

22
Putting the Treatment Unit into Operation
Putting the Unit into Operation
Before putting your treatment unit into initial operation, an intensive fl ushing
must be carried out [→page 51 or page 55 ].
After the unit has
been switched on,
the operating
system is booted.
Only use your fi nger to operate the touchscreen. Operating the touchscreen
with hard objects can scratch or damage the surface.
1
2
Activating /
Deactivating the
Treatment Unit
T 6,3A H 250V
The treatment unit is equipped with a power switch
1
on the chair base. The
power switch connects the treatment unit with the power supply. In the event of
longer downtimes, the treatment unit should be disconnected from the
power supply. The treatment unit contains a device fuse
2
. Switch on the
treatment unit at the power switch.The power switch lights up green.