DKL L2-S300, Operating Instructions Manual, Page: 50 / 327

1
Turbine hose without coupling
2
Motor without contra-angle
2
Motor without contra-angle
2
Motor without contra-angle
3
Scaler hose without handpiece
4
Syringe
4
Syringe
Bottle Care System
50
Labelling on the bottle
REF
Expiration date year-month
Article number
Hygiene Cover
Flushing Function with the Bottle Care System
Open the menu “Flushing“ at the touchscreen
Select “normal fl ushing“
Message: Take out all the instrument tubes
With the convenient hygiene cover it is possible to fl ush all the instruments rapidly or intensively.
Put the hygiene cover into the cuspidor bowl. Remove all the instruments from their
holders and insert them into the hygiene cover. Start with the turbine connections,
micromotors and the piezo scaler tube. Then clamp the syringes into their fi xtures. Only
fl ip the lever to activate the syringe after fl ushing has been started on the touchscreen.
If the treatment unit is equipped with a bottle care system, make sure that the bottle is
freshly fi lled with water (see section Bottle Care System).
2
2
1
3
4
4
Carry out the initial rinse before starting work without chlorine dioxide solution.