DKL L2-S300, Operating Instructions Manual, Page: 63 / 327

63
IEC STANDARD 60601-1-2:2014, 4th Edition
This device is approved for use in a specifi c electromagnetic environment. The customer or user of the
device must ensure that it is used in an electromagnetic environment in accordance with the description
given below.
Emission Measurement Agreement Guidelines Regarding the Electromagnetic Environ-
ment
RF-emission according to
CISPR 11 Group 1 This device uses RF-energy for internal functions only. RF-
emissions are therefore very low, and it is unlikely that other
nearby electronic equipment will be disturbed.
RF-emission according to
CISPR 11 Class B The device is suitable for use in all environments, including
residential areas, and approved for direct connection to the
public low-voltage network for residential areas.
Harmonics according to
IEC 61000-3-2 Class A
Voltage fl uctuations/ fl icker
according to IEC 61000-3-3 met
Interference Immunity
Test IEC 60601-
test level Compliance level
Electromagnetic Environment - Guidelinesf
Electrostatic
Discharge (ESD) according
to IEC 61000-4-2 ± 8 kV contact
discharge
±2, 4, 8, 15 kV air
discharge ± 8 kV contact discharge
±15 kV air discharge
The fl oor should be wood, concrete or tiles. If the
fl oor is covered with synthetic material, the relative
humidity should be at least 30%. Criterion B
Fast transient electrical dis-
turbances/bursts according
to IEC 61000-4-4
(only for V 300/600) ± 2 kV for mains
100 kHz repeat rate ± 2 kV for mains
100 kHz repeat rate The quality of the mains power supply should
meet the requirements for a normal commercial or
clinical environment. Criterion B
Surge voltages according to
IEC 61000-4-5
(only for V 300/600) ± 0,5 kV , ± 1 kV
L to N
± 0,5 kV , ± 1 kV ± 2 kV
L to GND ± 1 kV
L to N
± 2 kV
L to GND The quality of the mains power supply should
meet the requirements for a normal commercial or
clinical environment. Criterion B
Voltage dips, short-term
interruptions and voltage
fl uctuations of the mains
supply lines according to
IEC 61000-4-11
(only for V 300/600)
0 % UT
0°,45°,90°,135°,180°,2
25°,270°,315°
0 % UT
0°
0%
70 % UT
0 % UT
0%
0 % UT
for 1/2 Period
1 Period
25 /30
Periods
(50/60Hz)
250/300 Periods
(50/60Hz) for 5 s
The quality of the mains power supply should meet
the requirements for a normal commercial or clini-
cal environment. If the user of the product requires
continuous operation even with interruptions of the
power supply, the product should be connected to
an uninterruptible power supply.
Criterion A (max. mains voltage)
Criterion B (min. mains voltage)
Criterion A (max. mains voltage)
Criterion B (min. mains voltage)
Criterion A (max. mains voltage)
Criterion B (min. mains voltage)
Criterion A (max. mains voltage)
Criterion B (min. mains voltage)
Magnetic fi eld at the mains
frequency (50/60 Hz) accor-
ding to IEC 61000-4-8
30 A/m
30 A/m Magnetic fi elds at the mains frequency should
have levels typical of an application in a
commercial or clinical environment.
Note: UT is the alternating mains voltage prior to the application of the test level.