DKL L2-S300, Operating Instructions Manual, Page: 37 / 327

37
Tray
The tray should be set correctly for your standard equipment and thus remain in
its desired position. The maximum load of the tray is 2 kg. Do not lean on the tray.
Pull back the bellows until the
adjusting screw (1) is visible. Place your standard
equipment on the tray (max. 2 kg) and move the tray
into ahorizontal position.
Set the adjusting screw (1) so that the arm remains
in the horizontal position (with a slight upward
tendency).
Turn the adjusting screw in the „ + „ direction = high
weight.
Turn the adjusting screw in the „ - „ direction = low
weight
Secure the 3 grub screws (2) with safety lacquer
(blue).
With the adjusting screw, the tray can be aligned in
its radially horizontal position.
Pull back the bellows until the adjusting screw (1) is
visible. Move the tray into a horizontal position.
Secure the adjusting screw (1) for the inclination with
thread locking fl uid (blue).
You can fi nd an application fi lm at www.youtube DKL Germany.
Video: DKL CHAIRS L2-D2-RANGE TRAY SETTINGS
LINK: https://youtu.be/r-Y14eEYtqI